Saving screen setups?
by
steverow
on 04-Jul-2010
Hi,
Does anybody know if it's possible to save the screen setup for each time CE starts up? FI, I like to split the screen 50/50 raster and vector and would very much like to have this config retained for the next time it starts.
Steve
Some of the screen configuration is stored in the voyage plan document, but not the split. About the closest you can get to what you are asking for is to define the "Reset Screen" configuration to be what you want and then tap the space bar quickly three times when you start up.
To define the Reset Screen, enter Cruise Mode, set the screen the way you want it, and then press-and-hold the RESET button on the top toolbar until you hear a beep.
Now when you use the RESET button by simply clicking, or you tap the space bar quickly three times, the screen will go back to the configuration you saved.
Thanks Brad, that works fine for me and is all I need, I was sure there must have been a way, which is why I asked on the forum first without bothering you. I expect it's in the help files as well somewhere, I will definitely read through these now.!!! Good long weekend, boat now in the water at Swansea Marina, only problem is with the Sea Toilet...any experts on Jabsco Heads please PM me.
Thanks
Steve